Short descriptio
Bracket "Forend B-11U" is an all-milled product made of alloy D16T, coated in black or desert color. Installed in place of the standard forend AKS-74U. Forms a Picatinny rail in the lower part of the forend , which allow... Read more...
Available Options
- Availability: In Stock
Bracket "Forend B-11U" is an all-milled product made of alloy D16T, coated in black or desert color.
Installed in place of the standard forend AKS-74U.
Forms a Picatinny rail in the lower part of the forend , which allows you to attach additional equipment to the weapon: underbarrel lights, LCC, handles, additional brackets, etc.
On the sides there is a guide Basis for the installation of brackets B-2, B-2L, B-2U, forming Picatinny rails on both sides, allowing you to attach additional equipment to the weapon.
Benefits in operation:
- Strength
- Improves the cooling of the weapon barrel
- Possibility of attaching additional equipment
Weight: 110 ± 10 g
Working range of ambient temperatures: from -50 ° С to + 50 ° С
Guaranteed storage and operation period: 60 months
Completeness of delivery:
1 pc | |
M5x7 screws | 4 pieces |
Operation manual | 1 piece |
For installation on weapons needed:
1. Partially disassemble the weapon and remove the stock forend
2. Install the bracket "Forend B-11U" instead of the standard forend, assemble the weapon
3. The bracket "Forend B-11U" must be installed in a regular place in the groove of the receiver of the weapon very rigidly, for this it is necessary:
- put the standard swivel washer on the B-11U
- combine the free the end of the B-11U with a groove in the receiver
- putting a wooden or metal spacer on the swivel washer, hammer the B-11U into the receiver of the weapon
- assemble the weapon
5. If, when installing the B-11U, the standard AK lock located on the swivel washer does not close, then it is necessary to slightly cut down the B-11U plane, with which it adjoins the swivel washer
Forend seating stiffness determines the rigidity of the sighting devices, which affects shot accuracy.