Brackets for quick-release swivels, Zenitco
Brackets for quick-release swivels, quick-release swivels for belts of different widths, as well as the Poloz-1 belt itself: in this article we will tell you more about the new products in our range, and show how the different options look on carabiners.
The tactical belt “Poloz-1” has gone on sale. It can be single-point or two-point, and is attached to a carbine with quick-release swivels. We make fittings from stainless steel, and we use Cheboksary slings. The same sling is used on a standard belt, at the moment it is the best that is on the market. Why? It does not melt on the hot parts of the machine gun after intense shooting. And slings made of other materials melt. We will definitely make a video about this.
“Skid-1” has a wide range of adjustments; if desired, it can be reassembled for both the right and left hands: whichever is more convenient for the user. In order to attach a belt to a carabiner, we have prepared several solutions. These are various brackets for a quick-release swivel. There are also solutions already built into our products.
Quick release swivel brackets
1) Swivel bracket A-4. Installed on the Basis guide, it forms a seat for a quick-release swivel. It can be installed on the Basis either using a screw at the junction of the upper and lower brackets, or using a cam clamp.
A-4 swivel brackets installed on the Basis guide of the B-11U handguard and the Leader kit
2) Swivel bracket A-5. Designed for owners of PT-1 and PT-1S stocks. These stocks initially have two swivels to choose from: single-point and circular. The A-5 bracket can be installed instead of them in the place where the single-point one is originally located.
Swivel bracket A-5 on the buttstock PT-1S
3) Swivel bracket A-6. Initially designed for installation on a circular swivel of PT-1 and PT-1S stocks. But the scope of application is not limited to this.
A-6 swivel bracket on the PT-1 buttstock circular swivel
4) Swivel bracket A-7. If the A-6 clings with a metal part, then the A-7 has a rubberized cable. The same as the user-favorite A-2L swivel. Can be attached to the circular swivel of the PT-1 and PT-1C stocks. It can be somewhere else depending on the layout of your carbine.
A-7 swivel bracket on the PT-1 buttstock circular swivel
Swivel bracket A-7 on a standard swivel
Swivel bracket A-7 on carbine SGS-202S
Slots for quick-release swivel, built into our products
The PT-3 and PT-3S stocks initially have a socket for a quick-release swivel. When developing new products, we will take into account the possibility of installing a quick-release swivel
Quick release swivels
The quick-release swivels themselves, which are part of the Poloz-1 belt, can be purchased separately. They are for different sling widths: there is an option for sling widths up to 31 mm and up to 37 mm. They are called, respectively, ABS-31 and ABS-37 (ABS stands for “Quick-Removable Swivel”).
The Poloz-1 tactical belt itself has a large set of adjustments, we will make a video instruction about them.