Front handle RK-1 - Zenitco

The front handle RK-1 is installed on any fore-end with a lower Picatinny rail or on the B-9, B-9M bracket and serves for the convenience of holding the weapon when firing.

Weight: 160 ± 5 g

Overall dimensions: (110 x 47 x 38) ± 5 mm

Working range of ambient temperatures: from -50 ° С to + 50 ° С

Guaranteed storage and operation period: 60 months

Benefits during operation:

• Strength
• The presence of a sealed container
• Ergonomics

Installation on the weapon:

The first installation method.

1. Before installing the front PK-1 handle on the "Forend" bracket, unscrew the screws to the maximum length.
2. Put the PK-1 fastening bar on the lower Picatinny rail of the Forend bracket.
3. Fix the front PK-1 handle on the Forend bracket by tightening the screws.

Second installation method .

1. After unscrewing the screw, remove the external mount from the handle of the front PK-1.
2. Insert the T-shaped spike of the front PK-1 handle into the T-slot of the B-9 bracket.
3. Fix the front handle RK-1 with the screw in the bracket body B-9.
4. Install the B-9 bracket, with the RK-1 fixed on it, onto the "Forend" bracket.


Delivery set:

Front handle PK-1	1 pc
Hex key	2 pcs
Operation manual	1 pc