Brand: Zenitco
Product Code: ZNT-0120
Short descriptio
The front handle RK-0 is installed on any fore-end with a lower Picatinny rail or on the B-9, B-9M bracket and serves for the convenience of holding the weapon when firing. Benefits during operation: Strength Availabi... Read more...
Available Options
$99.00
- Availability: In Stock
The front handle RK-0 is installed on any fore-end with a lower Picatinny rail or on the B-9, B-9M bracket and serves for the convenience of holding the weapon when firing.
Benefits during operation:
Overall dimensions : 88х47х38 mm
Weight: 138 g
Material: alloy D16T
Working range of ambient temperatures: from -50 to + 50 ° C
Guaranteed storage and operation period: 60 months
For installation on weapons you need:
The first way to install.
1. Before installing the front handle PK-0 on the "Forend" bracket, unscrew the screws to the maximum length
2. Put the PK-0 fastening bar on the lower Picatinny rail of the "Forend" bracket
3. Fasten the front handle RK-0 on the "Forend" bracket by tightening the screws
The second method of installation.
1. After unscrewing the screw, remove the external mount from the front PK-0 handle
2. Insert the T-shaped spike of the front PK-0 handle into the T-slot of the B-9 bracket
3. Fix the front handle RK-0 with the screw in the bracket body B-9
4. Install the B-9 bracket, with the RK-0 attached to it, onto the "Forend" bracket.
Scope of delivery:
Operation manual
Benefits during operation:
- Strength
- Availability of a sealed container
Overall dimensions : 88х47х38 mm
Weight: 138 g
Material: alloy D16T
Working range of ambient temperatures: from -50 to + 50 ° C
Guaranteed storage and operation period: 60 months
For installation on weapons you need:
The first way to install.
1. Before installing the front handle PK-0 on the "Forend" bracket, unscrew the screws to the maximum length
2. Put the PK-0 fastening bar on the lower Picatinny rail of the "Forend" bracket
3. Fasten the front handle RK-0 on the "Forend" bracket by tightening the screws
The second method of installation.
1. After unscrewing the screw, remove the external mount from the front PK-0 handle
2. Insert the T-shaped spike of the front PK-0 handle into the T-slot of the B-9 bracket
3. Fix the front handle RK-0 with the screw in the bracket body B-9
4. Install the B-9 bracket, with the RK-0 attached to it, onto the "Forend" bracket.
Scope of delivery:
Operation manual
Handle front RC-0 | 1 pc |
Hex key | 2 pcs |
1 piece |