Bracket over the receiver B-13P - Zenitco

The bracket above the B-13P receiver is an all-milled product made of D16T alloy with a black or desert color coating.

The bracket above the B-13P receiver is installed on the standard "Swallowtail" base, located on the machine gun receiver , and provides installation of sighting devices on the weapon.

Forms a Picatinny rail over the receiver of the weapon.

Allows you to install on the weapon, both individual optical sighting devices, and a combination of devices.

Advantages during operation:

• light weight and strength
• the ability to quickly mount and remove from the weapon
• the ability to double fixation on the standard "Dovetail" base
• when mounted on a weapon does not cover the standard sighting device of the weapon

Weight: 275 ± 5 g

Overall dimensions: (270x99x58) ± 5 mm

Length of Picatinny rail: 240 ± 5 mm

Operating temperature range of ambient air: from -50 to + 50 ° С

Guaranteed storage and operation period: 60 months

Delivery set:

Bracket over the receiver B-13P	1 pc
Hex key	2 pcs
Operation manual	1 piece

To install on a weapon you need:

1. Set the bracket locking lever to the "open" position

2. Put the B-13P on the side bar of the weapon's receiver, moving the B-13P from the stock to the barrel

3. Turn the bracket locking lever to the "closed" position, then check the fixation of the bracket on the side plate of the receiver

4. If, after turning the bracket locking lever to the "closed" position, the B-13P is not fixed or is not fixed firmly enough on the side plate of the receiver, you must perform the following actions:

• move the lever to the "open" position
• using a hex wrench, loosen the locking screw located on the lever
• with a screw inside the lever using another key, achieve the moment of the beginning of fixing the B-13P on the side plate of the receiver and tighten the locking screw with a wrench
• turn the locking lever to the closed position