Brand: Zenitco
Product Code: ZNT-0133
TOP
Popular
Short descriptio
The Sport-1 set is installed in place of the standard AK forend and carbines based on it and has a base guide for installing accessories compatible with the Basis directly on the forend, namely: brackets B-2 (45mm), B-2L... Read more...
Available Options
$569.00
- Availability: In Stock
The Sport-1 set is installed in place of the standard AK forend and carbines based on it and has a base guide for installing accessories compatible with the Basis directly on the forend, namely: brackets B-2 (45mm), B-2L (34 mm), B-2M (15 mm), B-2U (75 mm), forming Picatinny rails for additional equipment; swivels A-1L or A-2L; stops RL-1; front handles RK-0L, RK-1L, RK-2L, RK-4L, RK-6L; pads on the guide Basis NPN-2; wire clamps ФП-3.
"Sport-1" set includes:
Advantages during operation:
Set weight: 250 + 10 g
Working range of ambient temperatures: from -50 ° С to +50 ° С
Warranty period of storage and operation of the product: 60 months.
< br> Completeness of delivery: < tr>
To install the kit you need:
1. Partially disassemble the weapon and remove the standard fore-end and the standard trim over the gas outlet pipe.
2. Install the bracket "Forend B-10L" instead of the standard forend.
3. Install the B-31L bracket.
4. Install the DL-1 bracket.
5. To give the necessary rigidity to the structure, connect the brackets B-10L and DL-1 by means of the fastening strip included in the kit.
Why are there so many screws in the kit?
8 screws М5х7 from B-31L is needed to fix the B-31L on the DL-1 and B-10L in case you will not use the side plate. If you will, then you should use 6 screws M5x7 and two screws M5x9 (longer), which are included in the DL-1 kit. The plate is installed with longer screws. They cannot be used in other attachment points. 8 screws М5х7 from the B-10L forend kit are required if you plan to install the B-33 receiver cover, the bracket over the B-22 rear sight block, and also use the B-10L outside the "Sport" kit together with brackets above the B-19 gas outlet pipe or B-19N. Please note that brackets B-19, B-19N, B-22 and B-33 are equipped with longer M5x9 screws, which cannot be used with the "Sport" set.
Detailed information about each bracket: its advantages in operation, technical characteristics, delivery completeness and installation instructions can be found in the manuals for each bracket.
Rigidity of the forearm and brackets included included in the kit, determines the rigidity of the sights, which affects the accuracy of the shot.
"Sport-1" set includes:
- bracket "Forend B-10L", 8 screws М5х7 and an operation manual;
- bracket DL-1, mounting plate, 2 screws М5х9 and operation manual;
- bracket above the gas outlet B-31L, 8 screws М5х7 and operation manual;
- Manual manual of the kit
Advantages during operation:
- Strength ;
- Improves the cooling of the weapon barrel from the receiver to the gas outlet tube;
- Creates the ability to attach additional equipment directly to the forearm ;
- Minimum weight and size characteristics.
Set weight: 250 + 10 g
Working range of ambient temperatures: from -50 ° С to +50 ° С
Warranty period of storage and operation of the product: 60 months.
< br> Completeness of delivery: < tr>
| Bracket "Forend B-10L" | 1 pc |
| Bracket over gas outlet pipe B-31L | 1 pc |
| Bracket "Additional nozzle DL-1" | 1 pc |
| Mounting plate | 1 pc |
| Mounting screws: М5х7 М5х9 | 16 pieces 2 pieces |
| Manual manual | 4 pcs |
To install the kit you need:
1. Partially disassemble the weapon and remove the standard fore-end and the standard trim over the gas outlet pipe.
2. Install the bracket "Forend B-10L" instead of the standard forend.
3. Install the B-31L bracket.
4. Install the DL-1 bracket.
5. To give the necessary rigidity to the structure, connect the brackets B-10L and DL-1 by means of the fastening strip included in the kit.
Why are there so many screws in the kit?
8 screws М5х7 from B-31L is needed to fix the B-31L on the DL-1 and B-10L in case you will not use the side plate. If you will, then you should use 6 screws M5x7 and two screws M5x9 (longer), which are included in the DL-1 kit. The plate is installed with longer screws. They cannot be used in other attachment points. 8 screws М5х7 from the B-10L forend kit are required if you plan to install the B-33 receiver cover, the bracket over the B-22 rear sight block, and also use the B-10L outside the "Sport" kit together with brackets above the B-19 gas outlet pipe or B-19N. Please note that brackets B-19, B-19N, B-22 and B-33 are equipped with longer M5x9 screws, which cannot be used with the "Sport" set.
Detailed information about each bracket: its advantages in operation, technical characteristics, delivery completeness and installation instructions can be found in the manuals for each bracket.
Rigidity of the forearm and brackets included included in the kit, determines the rigidity of the sights, which affects the accuracy of the shot.