Brand: Zenitco
Product Code: ZNT-0150
Short descriptio
The kit is designed to be mounted on AR-15 based carbines. Consists of a forend and additional accessories. Forend length - 345 mm (13.6 "). Forms a Picatinny rail on top and guides Base from three sides. Guide Base all... Read more...
$949.00
- Availability: In Stock
The kit is designed to be mounted on AR-15 based carbines. Consists of a forend and additional accessories. Forend length - 345 mm (13.6 ").
Forms a Picatinny rail on top and guides Base from three sides. Guide Base allows you to install additional equipment directly on the fore-end, in particular: brackets B-2 (45mm), B-2L (34 mm), B-2M (15 mm), B-2U (75 mm), forming Picatinny rails for additional equipment; swivels A-1L or A-2L; stops RL-1; front handles RK-0L, RK- 1L, RK-2L, RK-4L, RK-6L; overlays on the guide rail Basis NPN-2; wire clamps FP-3.
Scope of delivery:
Dimensions :
Upper bracket B-73: (306x39x38) ± 5 mm. ;
Lower bracket B-83: (345x41x51) ± 5 mm .;
The basis for mounting brackets "Joker" (barrel nut) titanium BN-1: (53x35) ± 5mm .;
Adjustable gas block RGB -2 titanium 0.750 ": (40x32x22) ± 5 mm.
Weight:
Upper bracket B-73: 130 ± 3 g;
Lower bracket B- 83: 172 ± 3 g.;
Joker (barrel nut) mounts titanium BN-1: 62 ± 3 g;
Adjustable gas block RGB-2 titanium 0.750 ": 30 ± 3 g.
To install to The Joker set requires:
The warranty period of the product is 60 months.
Forms a Picatinny rail on top and guides Base from three sides. Guide Base allows you to install additional equipment directly on the fore-end, in particular: brackets B-2 (45mm), B-2L (34 mm), B-2M (15 mm), B-2U (75 mm), forming Picatinny rails for additional equipment; swivels A-1L or A-2L; stops RL-1; front handles RK-0L, RK- 1L, RK-2L, RK-4L, RK-6L; overlays on the guide rail Basis NPN-2; wire clamps FP-3.
Scope of delivery:
Upper bracket B-73 | 1 pc. |
Lower bracket B- 83 | 1 pc. |
The base for mounting brackets "Joker" (barrel nut) titanium BN-1 | 1 pc. |
Screw М5х7 | 8 pcs. |
Antabka A- 2Л | 1 pc. |
Stop RL-1 | 1 pc. |
Bracket B-2L | 1 pc. |
Adjustable gas block RGB-2 titanium 0.750 "(with fixing pin) | 1 pc. |
Device for positioning of the gas block RSB-2 | 1 pc. |
Key "Joker" | 1 pc. |
Low-profile pad NPN-2 | 6 pcs. |
Tube (packaging) | 1 pc. |
Operation manual | 1 pc. |
Upper bracket B-73: (306x39x38) ± 5 mm. ;
Lower bracket B-83: (345x41x51) ± 5 mm .;
The basis for mounting brackets "Joker" (barrel nut) titanium BN-1: (53x35) ± 5mm .;
Adjustable gas block RGB -2 titanium 0.750 ": (40x32x22) ± 5 mm.
Weight:
Upper bracket B-73: 130 ± 3 g;
Lower bracket B- 83: 172 ± 3 g.;
Joker (barrel nut) mounts titanium BN-1: 62 ± 3 g;
Adjustable gas block RGB-2 titanium 0.750 ": 30 ± 3 g.
To install to The Joker set requires:
- Dismantle the muzzle device, standard forend, gas block, barrel nut from the carbine.
- Unscrew the base of the brackets “Joker” (barrel nut) BN-1: divided into fastening and fixing nuts. Tighten the retaining nut on the carabiner.
- Install the B-83 lower bracket.
- Install the retaining nut. Tighten it with the Joker wrench.
- Install the adjustable gas block RGB-2. To do this:
- Install a gas pipe on the RSL-2 (compatible only with straight pipes);
- Put the RSL-2 on the barrel;
- Position the RSL-2 on the barrel so that the gas outlet coincides with the gas inlet on the RSL-2. To do this, put the device for positioning the gas block on the lower bracket of the B-83 like on the runners, so that the RSL-2 will enter it. After that, tighten the two screws on the RGB-2.
- Remove the device for positioning the gas block. - Install the upper bracket B-73 on the lower one and slide it so that it sits in the grooves.
- Using six screws, fix the upper bracket B-73 on the lower bracket B-83.
- Install the A-2L swivel, stop RL-1, bracket B-2U in convenient places, if necessary.
- Install pads on the guide rail Base NPN-2, if necessary, in convenient places.
The warranty period of the product is 60 months.