Remote button KV-D2 - Zenitco

• combined devices: "Finger-4", starting with version 3.0; “Finger-4M”, starting from version 3.0, “Finger-4P”, starting from version 3.0, “Finger-3”, starting from version 2.0, “Finger-2”, starting from version 2.0; 
• lanterns: "Tick-1", starting from version 2.0, "Tick-1 + LTSU" (all versions), "Tick-2", starting from version 2.0, "Tick-2PS + LTSU" , starting from version 2.0, "Kleshch-2P", starting from version 2.0, "Kleshch-2D", starting from version 2.0 "," Kleshch-2U ", starting from version 2.0," Kleshch-2P-IK ", starting from version 2.0, "Klesh-2D-IK", starting from version 2.0, "Klesh-2U-IK", starting from version 2.0.

With lanterns and combined devices of earlier versions KV-D2 is incompatible. The version name is indicated in the product name. If the version is not specified, then it is an earlier version.

KV-D2 design and operation:

The KV-D2 remote button performs the same function as the buttons on the product body. The rotary switch is designed to adjust the brightness.

1. Picatinny rail : by means of an additional bracket consisting of two clamping bars, a central clamp and a stopper in the middle.
2. Guide Base: using a cam clamp or a hook clamp.
   

1. Connect the KV-D2 button to the product by plugging the plug into the connector, after removing the rubber pad and aligning the contact parts. To detach the button, grasp the retaining ring on the connector and pull it towards you.
2. Place the button in the desired location on the carabiner.