Brand: Zenitco
Product Code: ZNT-KVD1P
Popular
Short descriptio
PLEASE NOTE THAT:THE CURRENT PRODUCTS ARE SUPPLIED WITH BUTTONS ONLY WITH A NEW CONNECTOR ("ZENITKA" V2.0.).EARLIER VERSIONS OF THE PRODUCTS GO BUTTONS "Previous VERSION OF THE PORT".Remote button KV-D1P with mounting on... Read more...
Available Options
$99.00
- Availability: In Stock
PLEASE NOTE THAT:
THE CURRENT PRODUCTS ARE SUPPLIED WITH BUTTONS ONLY WITH A NEW CONNECTOR ("ZENITKA" V2.0.).
EARLIER VERSIONS OF THE PRODUCTS GO BUTTONS "Previous VERSION OF THE PORT".
Remote button KV-D1P with mounting on the Basis rail and Picatinny rail is designed for:
combined devices: "Perst-4", "Perst-4M", "Perst-3", "Perst-2";
flashlights: "Kleshch-1", "Kleshch-1 + LCU", "Kleshch-2", "Kleshch-2PS + LCU", "Kleshch-2P", "Kleshch-2D", "Kleshch-2U".
Device and operation of KV-D1P:
The remote button KV-D1P performs the same function as the buttons located on the body of the product.
Made of D16T alloy with a black coating.
Mounted on:
Picatinny rail: using an additional bracket consisting of two clamping bars, a central clamp and a stopper in the middle.
Guide Basis: using a cam clamp or an M5x9 screw (at the junction of the forearm with the top bracket).
Temperature regime during operation: from -20°С to +40°С
Warranty period: 12 months.
Delivery set:
Remote button KV-D2P 1 pc.
adapter for Picatinny rail 1 pc.
cam clamp 1 pc.
screw M5x9 1 pc.
instruction manual 1 pc.
To install the Remote button KV-D1P, you need:
Connect the KV-D1P button to the product by inserting the plug into the connector, after removing the rubber pad and aligning the contact parts. To disconnect the button, it is necessary to grasp the retaining ring on the connector and pull it towards you.
Install the button on the selected place on the carabiner.