Brand: Zenitco
Product Code: ZNT-0045
Short descriptio
Remote button KV-5P is intended for PC "Finger". Equipped with a safety device against accidental activation. Made of alloy D16T with a black coating. Mounted on a Picatinny rail with two clamping bars and two screws.... Read more...
Available Options
$149.00
- Availability: In Stock
Remote button KV-5P is intended for PC "Finger".
Equipped with a safety device against accidental activation.
Made of alloy D16T with a black coating.
Mounted on a Picatinny rail with two clamping bars and two screws.
< br> Weight: 58 + 5 g
Overall dimensions: (320х29х13) + 5 mm
Ambient temperature during operation: from -20 ° С to + 40 ° С
Warranty period: 12 months.
Completeness of delivery:
To install the KV-5P Remote Button you need:
1. Loosen set screws as far as possible
2. Install the button to the lantern or laser head connected to it, in any convenient place on the Picatinny rail
3. Fix the button by tightening the screws
Attention !!!
To improve the noise immunity of the Finger-4 PC, the electronic unit was modernized, which required changing the electronics of the remote button.
The update did not entail changes in the tactical characteristics of the product, but it is important to know: if the Finger-4 was released before the update, then the KV-4/2 button is needed for it, if - after the update, then - KV -4 / 2U (universal).
To avoid confusion, KV-5PU engraving was introduced on the Finger-4 PC case under the connector for the button. If there is no engraving, then the PC is before the update. If there is engraving, then the PC after the update.
All PC "Finger-4", released from the second half of January 2020, are released with updated electronics.
Equipped with a safety device against accidental activation.
Made of alloy D16T with a black coating.
Mounted on a Picatinny rail with two clamping bars and two screws.
< br> Weight: 58 + 5 g
Overall dimensions: (320х29х13) + 5 mm
Ambient temperature during operation: from -20 ° С to + 40 ° С
Warranty period: 12 months.
Completeness of delivery:
Remote button KV- 5П | 1 piece |
Operation manual | 1 piece |
To install the KV-5P Remote Button you need:
1. Loosen set screws as far as possible
2. Install the button to the lantern or laser head connected to it, in any convenient place on the Picatinny rail
3. Fix the button by tightening the screws
Attention !!!
To improve the noise immunity of the Finger-4 PC, the electronic unit was modernized, which required changing the electronics of the remote button.
The update did not entail changes in the tactical characteristics of the product, but it is important to know: if the Finger-4 was released before the update, then the KV-4/2 button is needed for it, if - after the update, then - KV -4 / 2U (universal).
To avoid confusion, KV-5PU engraving was introduced on the Finger-4 PC case under the connector for the button. If there is no engraving, then the PC is before the update. If there is engraving, then the PC after the update.
All PC "Finger-4", released from the second half of January 2020, are released with updated electronics.