Brand: Zenitco
Product Code: ZNT-0044
TOP
Popular
Short descriptio
Remote button KV-4/2U with mounting on the Picatinny rail is designed for simultaneous control of the Kleshch-2 and LTSU Perst-4U lantern. Equipped with a safety device against accidental activation and two rotary contr... Read more...
$179.00
- Availability: In Stock
Remote button KV-4/2U with mounting on the Picatinny rail is designed for simultaneous control of the Kleshch-2 and LTSU Perst-4U lantern.
Equipped with a safety device against accidental activation and two rotary controls for the brightness of the product.
Weight: 57 + 5 g
Overall dimensions: (310x29x20) + 5 mm
Ambient temperature during operation: from -20 ° С to + 40 ° С
Guaranteed shelf life and operation: 12 months.
Completeness of delivery:
To install the remote button KV-4/2U you need:
1. Connect the button to the LCC and the flashlight by inserting the plug into the connector
2. Unscrew the set screws to the maximum length and install the button with the connected laser head and flashlight in any convenient place on the Picatinny rail
3. Fix the button by tightening the screws
Attention !!!
To improve the noise immunity of the Finger-4 PC, the electronic unit was modernized, which required changing the electronics of the remote button.
The update did not entail changes in the tactical characteristics of the product, but it is important to know: if the "Finger-4" was released before the update, then the KV-4/2 button is needed for it, if - after the update, then - KV -4 / 2U (universal).
To avoid confusion, KV-5PU engraving was introduced on the Finger-4 PC case under the connector for the button. If there is no engraving, then the PC is before the update. If there is an engraving, it means a PC after the update.
All Finger-4 PCs released from the second half of January 2020 are released with updated electronics.
Equipped with a safety device against accidental activation and two rotary controls for the brightness of the product.
Weight: 57 + 5 g
Overall dimensions: (310x29x20) + 5 mm
Ambient temperature during operation: from -20 ° С to + 40 ° С
Guaranteed shelf life and operation: 12 months.
Completeness of delivery:
| Remote button KB -4/2U | 1 piece |
| Operation manual | 1 piece |
To install the remote button KV-4/2U you need:
1. Connect the button to the LCC and the flashlight by inserting the plug into the connector
2. Unscrew the set screws to the maximum length and install the button with the connected laser head and flashlight in any convenient place on the Picatinny rail
3. Fix the button by tightening the screws
Attention !!!
To improve the noise immunity of the Finger-4 PC, the electronic unit was modernized, which required changing the electronics of the remote button.
The update did not entail changes in the tactical characteristics of the product, but it is important to know: if the "Finger-4" was released before the update, then the KV-4/2 button is needed for it, if - after the update, then - KV -4 / 2U (universal).
To avoid confusion, KV-5PU engraving was introduced on the Finger-4 PC case under the connector for the button. If there is no engraving, then the PC is before the update. If there is an engraving, it means a PC after the update.
All Finger-4 PCs released from the second half of January 2020 are released with updated electronics.