Instrument microscope IMTsL150h75 - NPZ

Brand: NPZ
Product Code: NPZ-1101

Short descriptio

IMTsL 150h75 microscopes are manufactured according to AL2.787.140TU specifications and are designed to measure: in transmitted and reflected light of external linear dimensions and shaft diameters up to 150 mm. in th... Read more...


  • Availability: Pre-Order

IMTsL 150h75 microscopes are manufactured according to AL2.787.140TU specifications and are designed to measure:

  • in transmitted and reflected light of external linear dimensions and shaft diameters up to 150 mm. in the longitudinal direction and up to 75 mm. in the transverse direction;
  • angles of products up to 360 ° along the goniometer head and round table;
  • cutters, milling cutters, cams and other tools, as well as templates of any configuration, the dimensions of which allow you to install them on the measuring table of the microscope.

    The measurement can be performed in rectangular and polar coordinates:

    • thread taps in diameter, pitch and angle of the profile;
    • thread gauges in step, profile angle, straightness of the profile and inner diameter;
    • cone gauges, cylindrical and conical bushings, radius profiles;
    • p distance between the centers of the holes.

    The principle of operation of microscopes is based on the use of photoelectric displacement transducers with linear scales that allow you to count the movements of the coordinate table with the output to a digital reading device.

    Instrument microscopes can be equipped with a video system for outputting images to a computer monitor and software for automated processing of measurement results.

    The microscope is designed to work under the following conditions :

    • ambient temperature (20 + 3) ° С;
    • rate of change of temperature in the working space during the measurement process not more than 0.5 ° С for 1 h;
    • relative humidity of ambient air 80 %;
    • mains voltage (220 +22 / -33) V;
    • mains frequency (50 +/- 1) Hz;

    Scope: workshops and measuring laboratories of engineering, instrument-making, microelectronics, institute laboratories.

    Microscopes are equipped with two-coordinate measuring tables of execution 1 (round table), execution 2 (rotary plate).

    Microscopes are made of type A without column tilt and type B with column tilt.

    Designation of instrumental microscopes.
    Type A microscopes:

    • IMCL 150x75 (1), A - (performance table 1)
    • IMTsL 150x75 (2), A - (performance table 2)
    Type B microscopes:
    • IMTsL 150x75 (1), B - ( execution table 1)
    • IMCL 150x75 (2), B - (execution table 2)

    < TR> < TD class = content-light> 0-75 < / tr> < / tr> < TD class = content-light> 70 < / tr> < TD class = content-light> 30 < TD class = content-light> 200

    Technical characteristics of instrumental microscopes IMCL 150x75 of all modifications

    Name Value
    Measuring range of lengths by the coordinate table, mm, in the directions:
    longitudinal 0-150
    Visible magnification of the telescope’s eyepiece, fold 10 < / td>
    Visible increase in the reading device of the ocular goniometer head, multiple 45
    Measuring range of flat angles by the ocular angle-measuring head, ° 0-360
    U oval of rotation of the limb of the round coordinate table, ° 0-360
    Angle of rotation of the slab of the coordinate table, ° +/- 5
    Range of readings of the scale of the radius of arcs, mm 0.1-60.0
    Range of measurement of the radii of arcs, mm:
    with a 1x lens 5.5-30.0
    with 3x lens 0.1-5.0
    Maximum angle of inclination of the microscope column relative to the vertical plane, ° +/- 12.5
    Maximum angle of inclination of the center line of the headstock relative to the horizontal plane, ° +/- 12
    Maximum distance between centers, mm:
    headstock with horizontal center line position when measuring products with diameter:
    up to 39 mm 315
    up to 85 mm 235
    headstock with tilt center line 200
    cent a headstock with high centers when measuring products with a diameter:
    up to 160 mm 180
    up to 180 mm 160
    Maximum diameter of the product, mm installed in the centers:
    headstock with horizontal center line position 85
    headstock with a tilted center line
    headstock with high centers 180
    Maxim diameter of the product installed in prismatic supports, mm 130
    Distance between the lens and the slide of the coordinate table , at least, mm 200
    Distance from the column to the axis of the microscope tube (reach), at least , mm 185
    Division price, ... ':
    scales of the ocular goniometer 1
    nonius of the scale of rotation of the limb of the coordinate table 3
    vernier tilt of the headstock center line 15
    microscope column tilt scales
    Digital readability for linear measurements, mm 0.0001
    Error when measuring linear dimensions, mm +/- 0.003
    Maximum mass of the measured product, kg,:
    installed on coordinate table 20
    set in the center of the headstock 5
    Overall dimensions of the microscope with an ocular angular head, mm, max: 540x570x620
    Transport packaging, mm, max: 1500x1100x1000
    Weight, kg, no more
    microscope with an ocular goniometer head 80
    of the main microscope set in a transport container
    Rated power consumption, V o A 120
    On mains voltage, V 220 + 22 / -33
    Current frequency, Hz 50 +/- 1

    < TD class = content-light>

    At the request of the customer, the microscope can be additionally equipped with accessories:

    • Video module for displaying the image of the measurement process and the measurement results on the monitor New!
    • Contact device for measuring holes
    • Lens 40x
    • Lens 20x
    • Lens 10x
    • Double image head
    • Double image head (in additional colors) < li> Ocular head (with a set of thread profiles)
    • Ocular head (with arcs of different curvatures)
    • Center headstock with high centers
    • Headstock (with tilt center line)
    • Prism for centerless objects
    • Illuminator high magnification reflected light
    • Television device
    • Projection device
    • Lens 1x
    • Lens 5x
    • О kulyar
    • Reflector
    • Table
    • Stand (2 types)
    • Clamp
    • Line measure

    The entire line of instrumental microscopes is entered in the State Register of Measuring Instruments and passes the primary verification in the state metrological service.

    Write a review

    Note: HTML is not translated!
        Bad           Good

    Supply of instrument microscopes IMCL 150x75 of all modifications:

    Name Quantity
    Microscope 1
    Digital readout device УЦО-209С 1
    Angular ocular head 1
     Reader 1
    3x lens 1
    Table 1
    Harness ОС-ВМ-II-5-1000 1
    Headstock with centers 1
    Frame (centering), (only for use. 1, with a round table) 1
    Illuminator 1
    Control roller 1
    Single spare parts kit
    Shipping container
    Operational documentation