Short descriptio
The microscope IMTsL 100x50, A is manufactured according to the technical specifications TU3-3.2387-91 and is designed to measure: in transmitted and reflected light of external linear dimensions and shaft diameters u... Read more...
- Availability: Pre-Order
The microscope IMTsL 100x50, A is manufactured according to the technical specifications TU3-3.2387-91 and is designed to measure:
- in transmitted and reflected light of external linear dimensions and shaft diameters up to 100 mm. in the longitudinal direction and up to 50 mm. in the transverse direction;
- angles of products up to 360 ° along the goniometer head and round table;
- cutters, milling cutters, cams and other tools, as well as templates of any configuration, the dimensions of which allow you to install them on the measuring table of the microscope. ul >
The measurement can be performed in rectangular and polar coordinates:
- thread taps in diameter, pitch and angle of the profile;
- thread gauges in step, profile angle, straightness of the profile and inner diameter;
- cone gauges, cylindrical and conical bushings, radius profiles;
- p distance between the centers of the holes.
The principle of operation of the microscope is based on the use of photoelectric displacement transducers with linear scales that allow you to count the movements of the coordinate table with the output to a digital reading device.
Instrument microscopes can be equipped with a video system for displaying images on a computer monitor and software for automated processing of measurement results.
The microscope is designed to work under the following conditions: < ul>
- ambient temperature (20 + 3) ° С;
- rate of change of temperature in the working space during the measurement process no more than 0.5 ° С for 1 h;
- relative humidity of the ambient air 80%;
- mains voltage (220 +22 / -33) V;
- mains frequency (50 +/- 1) Hz;
Scope: workshops and measuring laboratories of enterprises engineering, instrumentation, microelectronics, laboratory institutes.
Specifications: | |
On naming | Value |
Measuring range of lengths by the coordinate table, mm, in the directions: | |
longitudinal | 0-100 | transverse | 0-50 |
Visible magnification of the ocular reading microscope goniometer head, multiple | 45 |
Measurement range of flat angles by the ocular goniometer head, ° | < TD class = content-light> 0-360|
Rotation angle of the overlay round table, ° | 360 |
Angle of rotation of the slab of the coordinate table, ° | +/- 5 | tr>
Maximum distance between the lens and the slide of the coordinate table, mm | 175 |
The maximum angle of inclination of the center line of the headstock relative to the horizontal plane, ° | +/- 12 |
Maximum distance between centers, mm: | |
headstock with a tilt center line | 200 |
grandmas from the horizon the total position of the center line when measuring products with diameters: | |
up to 39 mm | 315 |
up to 85 mm | 235 | Maximum diameter of the product, mm, installed in the centers: |
dowels with horizontal position of the center line in prismatic supports | 85 |
dowels with a tilted center line td > | 70 |
Distance from the column to the axis of the microscope tube (reach), not less, mm | 110 |
Measuring range along the vertical coordinate when working with the contact device, mm td > | 0-28 |
Range of indications of a scale of an arc of circles, mm | 0.1-60 |
Range of measurement of the radii of circular arcs, mm: | |
with a 1x lens | 5.5-30 |
with a lens 3x | 0.1-5 |
Division price, ... ': | |
eyepiece scales heads | 1 |
nonius of the scale of rotation of the overlay round table | 3 |
nonius of the inclination of the center line of the headstock | 15 |
Digital resolution for linear measurements, mm | 0.0001 |
Error with measurement of linear dimensions, mm | +/- 0.003 |
Maximum mass of the measured product installed on the coordinate table, kg, no more: | 10 |
Dimensional dimensions, mm, not more than: | |
of the microscope | 370x355x540 |
transport packaging | 1330x1160x905 |
Weight, kg, no more | |
microscope with an eyepiece | < TD class = content-light> 40|
of the main set of the microscope in the shipping container | 130 |
Rated power consumption, V o A | 100 |
Mains voltage, V | 220 + 22 / -33 |
Frequency current, Hz | 50 +/- 1 |
Package Contents: | |
Name | Quantity |
Microscope | 1 |
Digital readout device УЦО-209С | 1 | Illuminator | 1 |
3x Lens | < TD class = content-light> 1|
Eyepiece | 1 | O-S-VM-11-5-1000 harness | 1 |
Affiliated points | |
Headstock (with a tilt center line) | 1 |
Ocular head (with a set of thread profiles) | 1 |
Ocular head (with arcs of different curvatures) | 1 |
Angular ocular head | 1 |
1x lens | 1 |
Lens 5x | 1 |
10x Lens | 1 |
Round table | 1 td> |
Press | 2 |
Prism | 2 |
Highlight | 3 td > |
Roller control | 1 |
Single spare parts kit | |
Shipping container | td> |
Operational documentation |
At the request of the customer, the microscope can be additionally equipped with accessories:
- Video module for image output Measurement and measurement results on the monitor New!
- Contact hole measuring device
- 40x lens
- 20x lens
- Double image head
- Double head images (in additional colors)
- Headstock with centers
- Corrugated table
- Dashed line measure of length with a division price of 1 mm, length 50 mm
- Case
- Frame
The entire line of instrumental microscopes is included in the State Register of Measuring Instruments and is undergoing initial verification by the state metrological service.
< / div>