Peristaltic infusion pump INP-01 - NPZ

Brand: NPZ
Product Code: NPZ-1059

Short descriptio


Appointment The peristaltic infusion pump INP-01 with accessories is designed for long-term and micro-volume administration of liquid or liquid drugs of small volume and high concentration , including, but not limited... Read more...

$0.00

  • Availability: Pre-Order


Appointment

The peristaltic infusion pump INP-01 with accessories is designed for long-term and micro-volume administration of liquid or liquid drugs of small volume and high concentration , including, but not limited to, the introduction of chemotherapeutic substances, cardiovascular drugs, antitumor drugs, agents that stimulate labor function, anticoagulants and painkillers.
Application area - inpatient and outpatient treatment institutions.

Product Specifications

The infusion pump provides a constant infusion rate and an accurate dosage of liquid drugs with prolonged administration.
  • Eleven occlusion levels are available;
  • Maximum infusion rate - 1200 ml / h;
  • Calibration to increase the accuracy of infusion;
  • Ensuring safety by monitoring the status of infusion;
  • Multiple infusion modes;
  • Device connection call a nurse;
  • Touch screen for quick and easy use user-machine interface;
  • Night display mode that reduces the effect of light on patients and the environment;
  • Three types of power sources: AC power supply, DC power supply (docking station for SINS-01 infusion pumps with accessories according to TU 32.50.50-003-07525645-2018) and a built-in lithium battery. A lithium battery can power the infusion pump for 2 hours 42 minutes at an infusion rate of 1200 ml / h;
  • Dual central processor and redundancy circuit for key units;
  • Two-way alarm for monitoring the main control circuit and motor control circuit;
  • Independent engine control circuit and the rest of the electronics control circuit;
  • Setting intervals between maintenance cycles and issuing automatic prompts;
  • Modular design allows us to combine infusion sys into multichannel systems by connecting them to a docking station for infusion pumps, which provides operation in the switching mode (relay);
  • The infusion pump does not include components and accessories to be sterilized;
  • The infusion pump is not designed to operate in environment with a high oxygen content (GOST R IEC 60601-1).

Note - the handle, tripod clamp, nurse call device are available on special order, depending on the customer’s wishes.

Technical Har product specifications

< table class = "common"> Parameter Technical specification Product name Peristaltic infusion pump -01 with accessories Model INP-01 Power supply < td> AC power source: AC voltage 1 00–240 V, 50/60 Hz, power consumption 45 VA DC power supply (docking station): DC voltage 12 V, maximum current consumption 1 A. Built-in lithium battery: lithium battery 11.1 V 1500 mAh (installed in infusion pump). Continuous use of a lithium battery: for 2 hours 42 minutes at an infusion rate of 1200 ml / h. Infusion modes "Speed", “Time”, “Weight”, “Beat. dose "," Trapezoid "," PP "(sequential switching mode)," Cap. infusion "(drip infusion mode) Setting range for the infusion rate 0.1-1200.0 ml / h (in all modes except the mode “Cap. Infusion”) See minimum step in table 3.4 p. 3.3.5 Infusate volume setting range 0.1–99.99 ml (minimum step 0.01 ml ) 100–999.9 ml (minimum step 0.1 ml) 1000–9999 ml (minimum step 1 ml) Error in the rate of infusion and volume of the infused infusion ± 5% Purge mode 1200.0 ml / h Bolus mode 0.1-1200.0 ml / h Function for automatic calculation of the speed of the bolus infusion by the volume of the bolus. The step of setting the infusion rate in Bolus mode 0.1-1200.0 ml / h 0.01 ml / h for the speed range 0.1-99.99 ml / h 0.1 ml / h for the speed range awns 100–999.9 ml / h 1 ml / h for the speed range 1000–1200 ml / h KVO mode 0.1 - 5.0 ml / h (minimum step 0.01 ml / h) Trapezoid mode Rise time parameter range 00: 01 - 99:59 h: minRanging time parameter range 00:01 - 99:59 h: min Shock dose mode Range the setting of the parameter "RP Speed" 0.1 - 1200 ml / h The setting range of the parameter "Speed ​​UD" 0.1 - 1200 ml / h The setting range of the parameter "Time UD" 00:01 - 99:59 h: min Cap. infusion " Range of setting the infusion rate (" Speed ​​") 0.03 - 400.0 drops / min (0.03 - 99.99 drops / min minimum step 0.01 drops / min; 100 , 0 - 400.0 drops / min minimum step 0.1 drops / min) Setting range for infusate volume ("ОО") 0.1 - 9999 ml (step for infusate volume 0.01 ml) Infusion time range 00:01 - 99:59 h: min Weight setting range 0.1 - 300 kg Air bubble detector Thresholds for the volume of detected air bubbles: 25, 50, 100, 200, 300, 500, 800 μl Setting range for occlusion pressure 225 mm RT. Art. - 975 mmHg. Art., 11 levels available Network cable length 1350 ± 50 mm Accessories Handle: Weight - no more than 135 g; Overall dimensions - no more than 200x60x90 mm; Maximum allowable load - no less than 35 kg. Tripod clamp: Weight - no more than 180 g; Overall dimensions - no more than 60x45x80 mm; Maximum permissible load - not less than 25 kg. Nurse call device: Mass - not more than 45 g; Overall dimensions - not more than 40x35x55 mm; Cable length - 280 ± 15mm. Drop sensor: Weight - not more than 50 g; Overall dimensions - not more than 75x35x15 mm; Cable length - 28015 mm. Alarms Almost completed, Completed, Occlusion, Low lithium battery, Lithium battery low, No lithium battery, No external power, Air bubbles, Drop sensor missing, No drops, Drop sensor error, Timeout, Duplicate number in switching mode (relay), Error starting infusion, Reminder signal. WIFI function < td> Connecting the docking station and the infusion pump information network Terms of Use  Climatic modification UHL 4.2 in accordance with GOST 15150 and GOST R 50444 Operating temperature range: from + 10 ° C to + 35 ° C, relative humidity up to 80% at 25 ° C Storage conditions Storage conditions in transport packaging: Air temperature from + 5 ° C to + 40 ° C, relative humidity up to 80% at 25 ° C < td> Transportation conditions Transportation conditions for vehicles: Air temperature from -50 ° C to + 50 ° C, relative humidity up to 100% at 25 ° C < td> Operating mode Continuous operating mode with in accordance with GOST R IEC 60601-1 Classification According to GOST R IEC 60601-1: class I (when powered by AC power), product with internal power supply (built-in lithium battery) in the absence of connection to the mains supply, working part of type CF (infusion line) Depending on the degree of protection against water penetration according to GOST 14254: IPX2 Overall dimensions 210 (width) × 80 (height) × 140 (depth) mm Service life 10 years Basic safety standards GOST R IEC 60601-1 Medical electrical equipment Ie. Part 1: General safety requirements, taking into account the basic functional characteristics. GOST R IEC 60601-1-2 Medical electrical equipment. Part 1-2: General safety requirements, taking into account the basic functional characteristics. Parallel standard. Electromagnetic compatibility. Requirements and tests. GOST R IEC 60601-1-6 Medical electrical equipment. Part 1-6. General safety requirements, taking into account the basic functional characteristics. Additional standard. Serviceability. GOST IEC 60601-1-8 Medical electrical equipment. Part 1-8. General safety requirements. General requirements, tests and guidelines for the use of medical signaling systems and medical electrical systems. GOST R IEC 62366 Medical devices. Designing medical devices taking into account operational suitability. GOST R 50444 Medical devices, apparatus and equipment. General specifications.

Write a review

Note: HTML is not translated!
    Bad           Good