Bracket B-30U - Zenitco

Brand: Zenitco
Product Code: ZNT-0143
Personaldiscount -15 %
Sale
TOP

Time left to buy:

Short descriptio


Bracket "Forend B-30U" - an all-milled product made of alloy D16T, with black or desert color coating. Installed in place of the standard forend AK, AKMS, AKM. Forms a Picatinny rail at the bottom part of the forend, whi... Read more...

Available Options


$329.00 $279.65

  • Availability: In Stock


Bracket "Forend B-30U" - an all-milled product made of alloy D16T, with black or desert color coating.
Installed in place of the standard forend AK, AKMS, AKM.
Forms a Picatinny rail at the bottom part of the forend, which allows you to attach additional equipment to the weapon: underbarrel lights, LCC, handles, additional brackets, etc.
On the sides there is a guide Basis for installing accessories compatible with the Basis directly on the forend, namely: brackets B- 2 (45mm), B-2L (34 mm), B-2M (15 mm), B-2U (75 mm), forming Picatinny rails for additional equipment; swivels A-1L or A-2L; stops RL-1; front handles RK-0L, RK-1L, RK-2L, RK-4L, RK-6L; overlays on the guide Basis NPN-2; wire clamps FP-3, remote buttons series "D".

Benefits in operation:
  • Strength
  • Improves cooling of the barrel of the weapon
  • Possibility of mounting additional equipment
Overall dimensions: (260x45x40) ± 5 mm
Weight: 197 ± 10 g
Working range of ambient temperatures environment: from -50 ° С to + 50 ° С
Guaranteed storage and operation period: 60 months
Completeness of delivery:
Bracket "Forend B-30U" 1 pc.
Screws М5х7 10 pcs.
Operation manual 1 pc.
To install on a weapon you need:
1. Partially disassemble the weapon and remove the stock forend
2. Install the bracket "Forend B-30U" instead of the standard forend, assemble the weapon
3. The bracket "Forend B-30U" must be installed in its original place in the groove of the receiver of the weapon very rigidly, for this it is necessary: ​​
  • put the standard swivel washer on the B-30U
  • combine the free the end of the B-30U with a groove in the receiver
  • putting a wooden or metal spacer on the swivel washer, hammer the B-30U into the receiver of the weapon
  • assemble the weapon
4. To install the B-30U into the receiver of a weapon, you should not cut it with a file, as this can lead to the formation of a backlash at the junction of the forend with the receiver

The rigidity of the forend determines the rigidity of the sights, which affects on the accuracy of the shot.

Write a review

Note: HTML is not translated!
    Bad           Good