Bracket B-30

Brand: Zenitco
Product Code: ZNT-0144

Short descriptio


Bracket "Forend B-30" is an all-milled product made of alloy D16T, coated with black or desert color. Installed in place of the standard AK forend or carbines based on it. Forms three Picatinny rails , allowing you to at... Read more...

Available Options


$379.00

  • Availability: In Stock


Bracket "Forend B-30" is an all-milled product made of alloy D16T, coated with black or desert color.
Installed in place of the standard AK forend or carbines based on it.
Forms three Picatinny rails , allowing you to attach additional equipment to the weapon: underbarrel lights, LCC, bipod, handles, additional brackets, etc.
Benefits in operation:
  • Strength
  • Improves cooling of the barrel of the weapon
  • Possibility of attaching additional equipment
Overall dimensions: (260x54x41) ± 5 mm
Weight: 270 ± 10 g < br>
Working range of ambient temperatures: from -50 ° С to + 50 ° С
Guaranteed storage and operation period: 60 months.
Completeness of delivery:
Bracket" Forend B-30 " 1 pc
Operation manual 1 piece

To install on a weapon you need:
1. Partially disassemble the weapon and remove the stock forend.
2. Install the bracket "Forend B-30" instead of the standard forend. 
3. The bracket "Forend B-30" should be installed in a regular place in the groove of the receiver of the weapon very rigidly, for this it is necessary: ​​
  • to put on the B-30 the standard swivel washer so that the swivel goes through the hole for the swivel in the forend;
  • align the free end of the B-30 with the groove of the receiver
  • put a metal spacer on the swivel washer, hammer the B-30 into the receiver of the weapon with a hammer through the spacer (to avoid "folding "B-30 during installation, it is allowed to use a hammer only on the swivel washer). You can't hit the forearm itself! You cannot cut the fore-end with a file!
  • Assemble the weapon
4. To install the B-30 in the receiver of a weapon, do not cut it with a file, as this can lead to the formation of a backlash at the junction of the forend with the receiver

Forend seating stiffness determines the rigidity of the sighting devices, which affects the accuracy of the shot .

Write a review

Note: HTML is not translated!
    Bad           Good