Bracket B-2 - Zenitco

Brand: Zenitco
Product Code: ZNT-0107
Personaldiscount -15 %
Sale
TOP

Time left to buy:

Short descriptio


Bracket B-2 is an all-milled product made of alloy D16T with a black or desert color coating. Designed for mounting on the brackets "Forend" B-10U, B-11U, B-20U, B-21U, B-10L, B-21L "from the side. Allows you to attac... Read more...

Available Options


$29.00 $24.65

  • Availability: In Stock


Bracket B-2 is an all-milled product made of alloy D16T with a black or desert color coating.

Designed for mounting on the brackets "Forend" B-10U, B-11U, B-20U, B-21U, B-10L, B-21L "from the side.

Allows you to attach additional equipment to the weapon: underbarrel flashlight, LTSU, tactical grip, bipod, etc.

Weight without fastening elements (screws, nuts, wrench): 10 ± 2 g

Dimensions: (45х22х9) + 2 mm

Operating temperature range of ambient air: from -50 ° С to + 50 ° С

Warranty period: 60 months

Completeness of delivery:

Bracket B-2 1 pc
Cam clamp 1 pc
Hook clamp 1 piece
Operation manual 1 piece
 

To install bracket B-2 on the fore-end you need:

1. Choose the most suitable place on the bracket "Forend B-10U, B-11U, B-20U, B-21U, B-10L, B-21L.

2. Determine the method that will be used to fix the bracket ( cam clamp or clip-hook). To fix the bracket, one fastening element is sufficient. Simultaneous use of fastening elements is possible.

3. Align the holes on the forend and bracket B-2.

4. Install the cam clamp on B-2. Install B-2 on the Base guide so that the cam clamp enters one of the grooves of the Base guide. Turn the cam mechanism clockwise until it stops. In order to remove B-2, turn the cam nut counterclockwise. In the case of using a clip-hook, align with the hole on the fore-end and, using B-2, fix the hook on the fore-end.

More detailed illustrated instructions are in the instruction manual.

Write a review

Note: HTML is not translated!
    Bad           Good