Brand: Zenitco
Product Code: ZNT-SetSport-5
Popular
Short descriptio
The "Sport-5" kit is intended for installation in place of the standard forearm of carbines based on the RPK, which have a fixation flag on the fitting. Has Basis guides on five sides. The Basis rail allows you to mount ... Read more...
Available Options
$619.00
- Availability: In Stock
The "Sport-5" kit is intended for installation in place of the standard forearm of carbines based on the RPK, which have a fixation flag on the fitting. Has Basis guides on five sides. The Basis rail allows you to mount additional equipment compatible with the Basis directly on the forearm (Picatinny rails, swivels, stops, handles, buttons, pads, wire holders).
Advantages in operation:
- strength;
- improves the cooling of the weapon barrel in the area from the receiver to the vapor tube;
- makes it possible to mount additional equipment.
- Specifications:
- Material: D16T aluminum alloy
- Set weight: 300 + 10 g
- Set length: 250 mm
- Working range of ambient air temperatures: from -50 to +50 °C.
Versions:
- Sport-5 V1.0;
- Sport-5 V1.1.
The product is produced in two modifications depending on the seat on the B-20L handguard (the only difference is in the B-20L modification, the rest of the brackets are the same in the two versions)..
Different carbines may have different seats, so check the appearance of your regular forearm with the photo before buying. Two types are available: type A with a wider seat and type B with a lower seat. Type A corresponds to version B-20L V1.0, Type B - B-20L V1.1. When placing an order, in the "complete set" section at the top of the product page, select the version that matches your carbine.
Delivery set:
Instruction manual 4 pcs.
To install the Sport-5 kit on a weapon, you must:
To make an incomplete disassembly of the weapon and remove the standard handguard and the standard trim over the gas outlet tube.
Install the B-20L forearm bracket instead of the standard forearm. Install standard fittings on the B-20L. To score with a hammer (apply blows to the fitting through the spacer). Close the checkbox on the forging.
Install bracket B-31RPK.
Install bracket DL-3. Tighten 6 screws M5x7. Leave untwisted two holes on the right side, a screed will be installed here.
Connect ties. One on the bottom and one on the right. Ties are mounted on longer M5x9 screws (4 pcs.)
The warranty period of the product is 60 months.
Bracket "B-31RPK" -1 PC.
Bracket "Handguard B-20L"- 1 PC.
Bracket "Additional nozzle DL-3"-1 PC.
Screed-2 - 2 pcs.
Mounting screws:
M5x7-6 pc
M5x9-4 pc