Reloading handle RP-2

Brand: Zenitco
Product Code: ZNT-0114
TOP

Short descriptio


The RP-2 reloading handle is a milled product made of D16T alloy with a black or desert color coating. Compatible with the Vityaz PP.  Installation of the RP-2 handle allows to increase the standard bolt handle and mak... Read more...

Available Options


$79.00

  • Availability: In Stock


The RP-2 reloading handle is a milled product made of D16T alloy with a black or desert color coating.

Compatible with the Vityaz PP. 

Installation of the RP-2 handle allows to increase the standard bolt handle and makes the weapon reloading more convenient.

The RP-2 is mounted on the standard bolt handle using the screws included in the kit. 

Weight: 17 + 2 g

Overall dimensions: (18x27) + 3 mm

Working range of ambient temperatures : from -50 ° С to + 50 ° С

Guaranteed storage and operation period: 60 months

Completeness of delivery:

Reloading handle RP-2 1 piece
Hex key 1 piece
Fixing screw 2 pieces
Manual operation 1 pc
To install the RP-2 reloading handle on the weapon you need:

1. Unscrew the fixing screws with the supplied RP-2 hex key, remove the inner part (part with an internal thread) from the outer casing

2. Carefully, separating the two halves of the inner part, install it on the standard bolt handle so that the threaded hole (located in the middle of the body of the inner part) is directed towards the muzzle of the weapon. After that, install the outer casing on top of the resulting structure (so that the holes for the fastening screws of the outer casing and the threaded holes of the inner part coincide)

3. Install and tighten the retaining screw (located in the center of the grip), then install and tighten the second fastening screw (located on the back of the grip and located as far as possible from the weapon axis)

    Write a review

    Note: HTML is not translated!
        Bad           Good