BRACKET OVER BARREL B-33RPK - Zenitco

Brand: Zenitco
Product Code: ZNT-01422
Personaldiscount -15 %
Sale
TOP

Time left to buy:

Short descriptio


BRACKET OVER BARREL B-33RPKThe receiver cover B-33RPK is a milled product made of D16T aluminum alloy with a black or desert color coating.B-33RPK is mounted on the fore-end: B-23L (including within the Sport-8, Sport-8U... Read more...

Available Options


$699.00 $594.15

  • Availability: In Stock


BRACKET OVER BARREL B-33RPK

The receiver cover B-33RPK is a milled product made of D16T aluminum alloy with a black or desert color coating.

B-33RPK is mounted on the fore-end: B-23L (including within the Sport-8, Sport-8U kits), B-20L (including within the Sport-5, Sport-5U kits "), B-20U by means of four screws and forms a Picatinny rail above the receiver, which does not overlap the aiming line when using standard mechanical devices.

The bracket with an integrated Picatinny rail B-33RPK is compatible with carbines with a box based on the RPK and a removable standard receiver cover (not on the axis).

Allows the installation of various sighting devices.

Ensures the consistency of the installation of sighting devices during repeated opening and closing.

Working range of ambient temperatures: from -50 ° С to + 50 ° С

Guaranteed storage and operation period: 60 months.

Completeness of delivery:
Cover over the receiver B-33RPK 1 piece
Spring return mechanism rear stop, guide

1 PC
Recoil damper DO-1
1 PC
Mounting screws 4 pcs
Operation manual 1 piece


To install the receiver cover B-33RPK weapon you need:
1. Remove the standard receiver cover, the standard return mechanism, remove the bolt carrier, bring the gas tube lock flag and rear sight to the upper position.

2. Install the cover of the B-33RPK receiver into the grooves of the already installed B-23L, B-20L or B-20U forend so that the steel insert in the upper part of the bracket fits into the breech and install four mounting screws. Next, tighten the four screws holding the cover to the forend.

3. Go through the return mechanism. Remove the spring from it and move it to the stop and guide included in the B-33RPK kit.

4. If you are installing on the Saigu-308, install the DO-1 recoil damper on the return mechanism. This is a must for this carbine. For others - at the discretion of the user.

5. Install the bolt carrier, return mechanism, close the B-33RPK. Distort the shutter several times.


More detailed illustrated instructions can be found in the instruction manual.

Write a review

Note: HTML is not translated!
    Bad           Good