Brand: Zenitco
Product Code: ZNT-0124
Time left to buy:
Short descriptio
The front handle RK-4 is installed on any fore-end with a lower Picatinny rail or on the B-9, B-9M bracket and serves for the convenience of holding the weapon when firing. Benefits during operation: Strength The prese... Read more...
Available Options
$99.00 $84.15
- Availability: In Stock
The front handle RK-4 is installed on any fore-end with a lower Picatinny rail or on the B-9, B-9M bracket and serves for the convenience of holding the weapon when firing.
Benefits during operation: Strength The presence of a sealed container Ergonomics
Overall dimensions: (78x47x38) + 2 mm
Weight: 127 + 3 g
Material: alloy D16T
Working range of ambient temperatures air: from -50 ° C to + 50 ° C
Guaranteed storage and operation period: 60 months
For installation on weapons are needed:
The first way to install.
1. Before installing the front PK-4 handle on the "Forend" bracket, unscrew the screws to the maximum length.
2. Put the PK-4 fastening bar on the lower Picatinny rail of the "Forend" bracket.
3. Fasten the front handle RK-4 to the "Forend" bracket by tightening the screws.
The second method of installation.
1. After unscrewing the screw, remove the external mount from the front PK-4 handle.
2. Insert the T-shaped spike of the front PK-4 handle into the T-slot of the B-9 bracket.
3. Fix the front handle RK-4 with a screw in the bracket body B-9.
4. Install the B-9 bracket, with the RK-4 fixed on it, onto the "Forend" bracket.
Delivery set:
Benefits during operation:
Overall dimensions: (78x47x38) + 2 mm
Weight: 127 + 3 g
Material: alloy D16T
Working range of ambient temperatures air: from -50 ° C to + 50 ° C
Guaranteed storage and operation period: 60 months
For installation on weapons are needed:
The first way to install.
1. Before installing the front PK-4 handle on the "Forend" bracket, unscrew the screws to the maximum length.
2. Put the PK-4 fastening bar on the lower Picatinny rail of the "Forend" bracket.
3. Fasten the front handle RK-4 to the "Forend" bracket by tightening the screws.
The second method of installation.
1. After unscrewing the screw, remove the external mount from the front PK-4 handle.
2. Insert the T-shaped spike of the front PK-4 handle into the T-slot of the B-9 bracket.
3. Fix the front handle RK-4 with a screw in the bracket body B-9.
4. Install the B-9 bracket, with the RK-4 fixed on it, onto the "Forend" bracket.
Delivery set:
Front handle PK-4 | 1 piece |
Hex key | 2 pieces |
Operation manual | 1 piece |