Brand: Zenitco
Product Code: ZNT-0068
Time left to buy:
Short descriptio
Bracket "Forend B-50" - a set of solid-milled products made of alloy D16T, with a black coating. B-50 is intended for installation on PC, PKM and PKP machine guns. Forms four Picatinny rails , allowing the installation o... Read more...
$559.00 $475.15
- Availability: In Stock
Bracket "Forend B-50" - a set of solid-milled products made of alloy D16T, with a black coating.
B-50 is intended for installation on PC, PKM and PKP machine guns.
Forms four Picatinny rails , allowing the installation of additional equipment on the weapon: LCC, handles, additional brackets, etc.
Benefits in operation:
Overall dimensions: (205х85х53) ± 5 mm
Working range of ambient temperatures: from -50 ° С to + 50 ° С
Warranty period of storage and operation: 60 months
Completeness of delivery:
To install on a weapon you need:
1. Complete disassembly of the "Forend B-50" bracket using an Allen key No. 4.
2. Install the lower part of the forend from the bottom of the barrel with an emphasis on the receiver, then install the side parts on the lower part of the forend so that the recesses in the left and right parts of the forend are aligned with the sockets for attaching the machine gun to the machine, screw in three mounting screws on each side.
3. On top of the forend, install the racks L = 16 mm with M5x30 screws (for PC, PKS, PKM, PKMS) and L = 66 mm with M5x80 screws (PKP), install the upper part of the forend on the racks, screw in three fastening screws.
B-50 is intended for installation on PC, PKM and PKP machine guns.
Forms four Picatinny rails , allowing the installation of additional equipment on the weapon: LCC, handles, additional brackets, etc.
Benefits in operation:
- Strength
- Possibility of attaching additional equipment
Overall dimensions: (205х85х53) ± 5 mm
Working range of ambient temperatures: from -50 ° С to + 50 ° С
Warranty period of storage and operation: 60 months
Completeness of delivery:
Bracket "Forend B-50" (top, bottom, right, left) | 1 pc |
Column L = 16 mm | 3 pcs |
Column L = 66 mm | 3 pcs |
Side brace | 2 pcs |
Screw М5х80 | 3 pcs |
Screw M5x30 | 3 pcs |
Screw M5x16 | 6 pcs |
Allen key # 4 | 1 pc |
Hex key # 2.5 | 1 pc |
Height adjustment insert | 2 pcs |
Operation manual | 1 pc |
1. Complete disassembly of the "Forend B-50" bracket using an Allen key No. 4.
2. Install the lower part of the forend from the bottom of the barrel with an emphasis on the receiver, then install the side parts on the lower part of the forend so that the recesses in the left and right parts of the forend are aligned with the sockets for attaching the machine gun to the machine, screw in three mounting screws on each side.
3. On top of the forend, install the racks L = 16 mm with M5x30 screws (for PC, PKS, PKM, PKMS) and L = 66 mm with M5x80 screws (PKP), install the upper part of the forend on the racks, screw in three fastening screws.