Time left to buy:
The bracket above the B-33 receiver (receiver cover) is a set of solid-milled products made of D16T alloy coated in black or desert color. Mounted on brackets B-10M, B-10U, B-10L ( including as part of the Sport-1 and S... Read more...
- Availability: In Stock
Mounted on brackets B-10M, B-10U, B-10L ( including as part of the Sport-1 and Sport-4 sets), B-30, B-30U by means of five screws (four screws form four points of support of the bracket above the B-33 receiver on the forend, and one screw forms additional fifth fulcrum, fixing the bracket above the B-33 receiver on the receiver) and forms a 170 mm long Picatinny rail (17 numbered cells) above the AK receiver, which does not overlap the aiming line when using standard mechanical sighting devices.
Receiver cover B-33, with an integrated Picatinny rail, is compatible with all AK models.
Allows the installation of any devices.
Ensures the consistency of the installation of sighting devices with repeated opening closing.
Weight: 215 ± 10 g
Overall dimensions: (300х50х37) ± 2 mm
Working ambient temperature range: from -50 ° С to + 50 ° С
Guaranteed storage and operation period: 60 months
|Cover over the receiver B-33||1 piece|
|Rear stop for return mechanism springs + guide||1 pc|
|Hex key||1 pc|
|Mounting screws||5 pieces|
|Operation manual||1 piece|
To install the bracket above the B-33 receiver on a weapon, you need:
1. Remove the stock cover of the receiver, remove the stock return spring assembly, move the gas tube lock flag and the rear sight to the upper position.
2. Unscrew the mounting screws from the bracket above the B-33 receiver with the included hex wrench, and then unscrew the screw from the insert.
3. Install the bracket above the B-33 receiver into the grooves of the already installed bracket B-10M, B-10U, B-10L (including in the Sport-1 and Sport-4 sets), B-30, B- 30У and tighten the four fixing screws, then install the steel insert and tighten the insert screw (it is advisable to install it on the thread lock). Next, tighten the four screws that pull the cover to the forend, then install the bolt carrier and the return spring included in the B-33 kit, close and fix the B-33 with the return spring lock.
Not recommended to use B-33 together with a damper.
More detailed illustrated instructions are in the instruction manual.