Bracket B-2U - Zenitco

Brand: Zenitco
Product Code: ZNT-0111
Personaldiscount -15 %
Sale
TOP

Time left to buy:

Short descriptio


Bracket B-2U is an all-milled product made of alloy D16T with black or desert color coating. Designed for mounting on brackets B-10U forearm , B-11U, B-20U, B-21U, B-10L, B-21L "from the side. Allows you to attach add... Read more...

Available Options


$31.08 $26.42

  • Availability: In Stock


Bracket B-2U is an all-milled product made of alloy D16T with black or desert color coating.

Designed for mounting on brackets B-10U forearm , B-11U, B-20U, B-21U, B-10L, B-21L "from the side.

Allows you to attach additional equipment to the weapon: under-barrel flashlight, LTSU, tactical grip, bipod, etc.

Weight without fastening elements (screws, nuts, wrench): 15 ± 2 g

Overall dimensions: (75x20x9) + 2 mm

Working range of ambient temperatures: from -50 ° С to + 50 ° С

Warranty period: 60 months.

Completeness of delivery:

Bracket B-2U 1 pc
Cam clamp 1 pc
Clamp-hook 1 pc
Operation manual 1 pc

To install bracket B-2U on the fore-end you need:

1 ... Choose the most suitable place on the bracket "Forend B-10U, B-11U, B-20U, B-21U, B-10L, B-21L"
2. Determine the method that will be used to fix the bracket (cam clamp or hook clamp). One fixing element is sufficient to secure the bracket. Simultaneous use of fastening elements is possible.
3. Align the holes on the fore-end and bracket B-2U.
4. Install the cam clamp on the B-2U. Install B-2U on the Basis guide so that the cam clamp enters one of the slots in the Basis guide. We turn the cam mechanism clockwise until it stops. In order to remove B-2U, it is necessary to turn the cam nut counterclockwise. In the case of using a clip-hook, align with the hole on the fore-end and, using B-2U, fix the hook on the fore-end.

More detailed illustrated instructions are in the operation manual.

Write a review

Note: HTML is not translated!
    Bad           Good