LED lamp "Kleshch-2PS + LTSU" (green +) ver 2.0

Brand: Zenitco
Product Code: LED lamp "Kleshch-2PS + LTSU" (green +) ver 2.0

Short descriptio


ATTENTION !!! THE LASER BEAM OR ITS MIRROR REFLECTION IS NOT ALLOWED ON THE VISION ORGANS! LED tactical flashlight with strobe function (repetitive bright light pulses with a flickering frequency of 12 Hz) and green la... Read more...

430.00€

  • Availability: In Stock


ATTENTION !!!

THE LASER BEAM OR ITS MIRROR REFLECTION IS NOT ALLOWED ON THE VISION ORGANS!

LED tactical flashlight with strobe function (repetitive bright light pulses with a flickering frequency of 12 Hz) and green laser designator amplified power "Kleshch-2PS + LTSU", which has a built-in mounting on the Picatinny rail, is designed for use on small arms.

The use of a super-bright LED with a capacity of 370 lumens (at 3 W) and a reflector with a diameter of 28 mm, allow to obtain a solid angle of the central illumination beam of 6.5 °, which, together with a toughened protective glass with antireflection, makes it possible to provide the highest quality illumination of objects at distances of up to 200 meters!

Integrated into the body of the product laser designator of increased power in visible range (green mark), has the ability to accurately adjust and has common controls with the flashlight.

Flashlight in low mode go light, constant light mode and tactical mode - serves to detect / illuminate the target.
Flashlight in strobe mode - to distinguish the silhouette in conditions of smoke, dust and / or fog.

LTSU of increased power for aiming fire, according to the LTSU brand (beam in a smoky space), or target designation.

The product provides for the possibility of permanent switching on, tactical (impulse) switching on, strobe mode in constant or tactical modes from one control button, depending on the mode selected by the switch. 

Availability of the possibility of a quick transition from the constant glow mode to the pulse mode and vice versa.

Built-in control of the remaining capacity of the batteries.

Stable luminous flux.

Possibility forced switching of the flashlight to the maximum brightness mode with a reduced remaining battery capacity.

The buttons located on the side control the operation of the device. One controls the LCC, the second one controls the lamp. The button in the back of the device turns it on in the selected mode.

The indicator of the device operation (in the back of the case) informs whether the device is turned off or not.

The product is powered from two elements installed in the case CR123A with a nominal voltage of 3V.

Minimum time of continuous operation of the flashlight :

  • in normal mode from one set of power sources - 3 ± 1 hour (depending on the batteries used)
  • in economy mode from one set of power sources - 12 ± 1 hour (depending on the batteries used)

Alloy body D16T.

Product weight with a battery: 185 ± 15 g

Overall dimensions: (50x43x80) ± 2 mm

Ambient temperature during operation: from -20 ° С to + 40 ° С

Guaranteed storage and operation period of the product: 12 months < br>
Executions of the "Pincer 2PS + LTSU" lantern :
  • "Pincer 2PS + LTSU" with red ym LTSU
  • "Tick 2PS + LTSU" with green LTSU (base power)
  • "Tick 2PS + LTSU" with green LTSU of enhanced power
  • "Tick 2IX + LTSU" in the IR range
Completeness of delivery :
    < tr>
    Flashlight with integrated laser head 1 pc
    KV-5PU remote button 1 pc
    Batteries type CR123A (installed in the flashlight) 2 pcs
    Aluminum case 1 pc
    Key for adjusting the laser head 1 pc
    Mount for the flashlight forming the Picatinny rail (B-9AK) 1 pc
    Operation manual 1 pc

Write a review

Note: HTML is not translated!
    Bad           Good